Culver City, CA Β· Westside

Bathroom Remodeling in Culver City, CA

Culver City files remodel permits through its online Permit Portal, with a separate application for each record type. We set up the building, plumbing, and electrical records so the review starts complete.

10

Bathroom Services

1,200+

Bathrooms Remodeled

4.9β˜…

Average Rating

Remodeling in Culver City

One Bathroom, Several Records

In Culver City, a bathroom with new plumbing and new lighting is not one application. The City asks for a separate record for building, plumbing, and electrical work, each tied to the same address.

That sounds like more paperwork, and it is. Getting it right on the first upload is what keeps the review moving.

Call (213) 715-1700

Free Culver City Bathroom Estimate

Tell us about the bathroom and what you want to change. A project manager will reply within one business day.

City Permits

Filing With Culver City Building Safety

Home remodels in Culver City need a Building Safety permit, applied for through the Culver City Permit Portal. Staff check the submittal for completeness, then email when plan check fees are due.

  1. 1

    Prepare documents

    The plans and documents follow the City's formatting rules: one PDF per document, text searchable, with space left for stamps.

  2. 2

    Apply in the portal

    Each structure and record type gets its own application in the Culver City Permit Portal.

  3. 3

    Completeness review

    Building Safety staff review the submission for completeness, with a response expected within 2 to 3 business days.

  4. 4

    Plan check and issuance

    Plan check comments run through the portal; once approved, both the City business license and state contractor license must be active.

  5. 5

    Build and inspect

    Construction should start within one year of issuance, and inspections are scheduled as the work proceeds.

Service Overview

Culver City Bathroom Services

Our Culver City projects range from a shower rebuild to a whole bathroom with a new layout. One team carries the job from the first measurement to the final walkthrough.

The cards below cover all ten services. The ones most homeowners ask about come first in the details section.

Insured

City permits

Culver City Building Safety

Clean job site

Dust control and daily cleanup

Clear pricing

Price ranges shown up front

Bathroom Services in Culver City

Start with a card; the details and price for each one are further down the page.

Service Details

Showers, Lighting, and Vanities

A rebuilt shower, better light, and a new vanity are frequent Culver City requests, and each touches a different permit record.

Bathtub Installation

Bathtub Installation in Culver City, CA

A new tub should fit the room you have, drain properly, and be comfortable for the people who use it most.

Choosing a tub starts with a tape measure. The alcove length, the wall depth, and the drain side decide which models fit without reframing. For an alcove tub, the three walls get backer board and a waterproof layer before tile. A freestanding tub sits on a drain placed exactly under its outlet, with enough open floor to clean around it.

Culver City note

Roughly 45 percent of the housing in Culver City dates from before 1960, so before we order a tub we check what the old one is made of and plan how it comes out without damaging the walls.

What we settle first

  • Measure the alcove and locate the drain
  • Compare acrylic, steel, and cast-iron weight
  • Plan the surround and valve height together
  • Check the delivery path into the bathroom

What is the price range for bathtub installation in Culver City?

A typical bathtub installation project in Culver City lands at $1,850-$8,650 overall.

A like-for-like alcove swap sits at the low end; a freestanding tub, new drain location, or full tile surround moves it up.

Typical price range

$1,850-$8,650

Total project, installed

Tub-to-Shower Conversion

Tub-to-Shower Conversion in Culver City, CA

Turn a little-used tub into a walk-in shower with a low curb or none at all, for easier everyday access.

Once the old tub is out, we check the drain location and the floor below. The shower base is set and sloped, or a tiled pan is built, and the walls get a waterproof layer from floor to ceiling. A low curb or a curbless entry is chosen based on what the floor allows.

Culver City note

If you rent, we need the owner's written approval before a tub is taken out, since census estimates show about 45% of Culver City's occupied homes are rented.

What we settle first

  • Decide where the drain will sit
  • Raise the valve for standing use
  • Choose a curb height or curbless entry
  • Add grab-bar backing in the walls

What should Culver City homeowners budget for tub-to-shower conversion?

For tub-to-shower conversion in Culver City, the typical total is $4,100-$12,350.

Drain relocation, curbless entries, and glass enclosures drive most of the cost.

Typical price range

$4,100-$12,350

Total project, installed

Shower-to-Tub Conversion

Shower-to-Tub Conversion in Culver City, CA

Bringing back a tub can make a secondary bathroom more useful for children or guests.

Putting a tub where a shower stands means finding one that fits the wall length and still leaves room at the door and the toilet. We locate the supply lines and drain and plan any changes before ordering. The surround is waterproofed to match an alcove, drop-in, or freestanding design, and an access panel is planned so the valve can be reached later.

Culver City note

A typical Culver City home has about 4.3 rooms in total, so where a home has only one bathroom we plan the conversion to keep the room out of use for as few days as we can.

What we settle first

  • Check that a standard tub fits the wall
  • Route water and drain lines to the new tub
  • Waterproof the surround
  • Keep the valve reachable for repairs

What does shower-to-tub conversion cost in Culver City?

For shower-to-tub conversion in Culver City, the typical total is $3,700-$10,600.

Price depends on whether the opening fits a standard tub, how far the drain moves, and the surround you choose.

Typical price range

$3,700-$10,600

Total project, installed

Bathroom Flooring Installation

Bathroom Flooring in Culver City, CA

The right bathroom floor resists water, stays safe underfoot when wet, and meets the hallway floor without an awkward step.

Tile size, slip resistance, and how the floor meets the tub, toilet, and doorway all get decided before installation. The old floor comes out, the subfloor is repaired and leveled, and the new floor is laid with expansion gaps where needed. The toilet is reset on a new seal.

Culver City note

Homes built before 1980 make up about 84% of the housing in Culver City. That is why we take up the old floor, look at what is under it, and repair the base before choosing tile.

What we settle first

  • Plan the tile layout around fixtures
  • Set the toilet on a level, solid surface
  • Decide on a heated mat before tile
  • Check floor height at the doorway

What should Culver City homeowners budget for bathroom flooring?

Most bathroom flooring in Culver City costs $8-$24, installed.

Floor prep, heated floor systems, and tile size and layout affect the per-foot cost.

Typical price range

$8-$24

Per square foot, installed

Walk-In Tub Installation

Walk-In Tub Installation in Culver City, CA

A walk-in tub offers a safer way to bathe for anyone with mobility concerns, provided the room, floor, and hot water supply can handle it.

Door direction, seat height, and fill and drain times differ from model to model. We match the tub to the space and to the person who will use it, then prepare the plumbing and any dedicated circuit. Grab bars and a handheld spray can be added at the same time.

Culver City note

Census estimates show about 41% of Culver City's homes are in buildings of five or more units; in those buildings we confirm the floor load and the elevator or stair route for delivery before ordering a walk-in tub.

What we settle first

  • Plan the route into the house
  • Check floor framing for the weight
  • Add a circuit if the model needs one

What is the price range for walk-in tub installation in Culver City?

For walk-in tub installation in Culver City, the typical total is $6,300-$13,800.

Model features and any wall or floor repairs set the final price.

Typical price range

$6,300-$13,800

Total project, installed

Toilet Installation

Toilet Installation in Culver City, CA

A new toilet can save water, improve comfort, and end the leaks and rocking of an older one.

A comfort-height toilet is easier to sit on and stand up from. An elongated bowl needs more room in front, so we check the clearance to the vanity and door. A bidet seat needs an outlet nearby. During installation, the toilet is set level on a sound flange, the supply line and shutoff are replaced, and the base is sealed.

Culver City note

Most Culver City homes, about 89%, were built before 1990, and California requires toilets that use more than 1.6 gallons per flush to be replaced when a permitted remodel of a house built before 1994 is finaled, so we install a water-conserving model and check the flange first.

What we settle first

  • Measure the rough-in
  • Repair the flange and subfloor
  • Replace an old shutoff valve
  • Keep clear space at the sides and front

What does toilet installation cost in Culver City?

Plan on $400-$950 per toilet in Culver City, installed.

Flange or subfloor repair and rough-in changes add to a simple replacement.

Typical price range

$400-$950

Per toilet, installed

Small Bathroom Remodeling

Small Bathroom Remodeling in Culver City, CA

In a small bathroom, every inch counts, so the layout is drawn before anything is ordered.

We draw small bathrooms to scale and try different door, vanity, toilet, and shower positions before demolition. A pocket door or a shallower vanity can free up floor space, and recessed niches and mirror cabinets add storage.

Culver City note

We open the walls carefully and plan recessed storage where the framing allows, since half of Culver City's homes predate 1963, according to Census figures.

What we settle first

  • Compare pocket and swing doors
  • Build storage into the walls
  • Plan drains around your wastewater system

How much is small bathroom remodeling in Culver City?

Small Bathroom Remodeling in Culver City usually costs $13,600-$39,650, start to finish.

Keeping the layout controls cost; moving fixtures adds plumbing work.

Typical price range

$13,600-$39,650

Total project, installed

Layout Planning

Choosing a Vanity Size

Before choosing a style, choose a size. The wall length and the plumbing location narrow the choice quickly.

  • Compact rooms usually take a 24- to 30-inch vanity with a single sink.
  • A 36- to 48-inch vanity is the common choice for hall and primary bathrooms.
  • Double sinks need roughly 60 inches or more of wall, plus a second drain and supply.
  • Floating vanities make a small room look bigger but need blocking inside the wall.

Wet Areas and Existing Conditions

Waterproofing, Ventilation, and Surfaces

Large tiles mean fewer grout lines to clean; smaller tiles grip better on a shower floor. We often pair the two: big tiles on the walls and a smaller mosaic underfoot. A quiet exhaust fan, sized to the room and vented outdoors, keeps moisture from damaging paint and cabinets. If the current fan is weak or noisy, the remodel is the time to replace it.

Existing Conditions Come First

Some problems only show once the old tile is gone. When that happens, we stop, show you, and price the repair before continuing. Typical finds include a soft subfloor near the toilet, a corroded drain, or a loose valve.

Cost Guide

Culver City Bathroom Remodel Costs

Most full bathroom remodels in Culver City come in at about $21,100-$56,250. Treat it as a planning guide; the estimate we write is based on your measured room.

The range draws on current bathroom project costs across Los Angeles County.

Where your project may land

The typical range above is where most full remodels land. A small refresh can come in below it, and a large remodel with layout changes can go above it.

Small refresh$15,350-$28,600

Surfaces and fixtures updated in place

Full remodel, same layout$29,550-$56,750

Everything replaced, plumbing stays put

Large remodel or layout change$46,350-$82,350

Layout changes, moved drains, premium materials

Your project may straddle two bands; that is normal.

The individual service prices are not additive, because a full remodel shares demolition, plumbing, and waterproofing.

Room size, hidden conditions, plumbing or wiring changes, and your selections decide where a project lands.

Service Area

Serving Culver City and the Westside

Culver City sits near Ladera Heights, Century City, and View Park-Windsor Hills on the Westside.

Culver City, on the Westside near Century City and Ladera Heights.

Neighboring areas we serve: Ladera Heights Β· Century City Β· View Park-Windsor Hills Β· Beverly Hills.

Reviews

What Homeowners Say About Our Team

β˜…β˜…β˜…β˜…β˜…

"They handled our permit, waterproofing, and design without us lifting a finger. The new shower still looks flawless three years later."

Rebecca T. Β· Pasadena, CA

β˜…β˜…β˜…β˜…β˜…

"Our 1940s bathroom had every surprise you can imagine behind the walls. The crew told us upfront and never blew the timeline."

Daniel M. Β· Silver Lake, CA

β˜…β˜…β˜…β˜…β˜…

"The finished bathroom matched the 3D design exactly. That alone put them ahead of the last contractor we used."

Carol F. Β· Sherman Oaks, CA

β˜…β˜…β˜…β˜…β˜…

"Fast, clean, and honest pricing from day one. No surprise charges after demo like our neighbor experienced."

Marcus L. Β· Long Beach, CA

β˜…β˜…β˜…β˜…β˜…

"We converted our tub to a walk-in shower and the whole bathroom feels twice as big now. Great tile work."

Priya K. Β· Torrance, CA

β˜…β˜…β˜…β˜…β˜†

"Our vanity installation was done in a single day with zero mess left behind. Very professional crew."

James O. Β· Burbank, CA

β˜…β˜…β˜…β˜…β˜…

"They pulled every permit and dealt with the city inspector so we never had to worry about compliance."

Angela R. Β· Culver City, CA

β˜…β˜…β˜…β˜…β˜…

"Walk-in tub installation for my mother went smoothly and the safety features give us real peace of mind."

Ben H. Β· Glendale, CA

β˜…β˜…β˜…β˜…β˜…

"They handled our permit, waterproofing, and design without us lifting a finger. The new shower still looks flawless three years later."

Rebecca T. Β· Pasadena, CA

β˜…β˜…β˜…β˜…β˜…

"Our 1940s bathroom had every surprise you can imagine behind the walls. The crew told us upfront and never blew the timeline."

Daniel M. Β· Silver Lake, CA

β˜…β˜…β˜…β˜…β˜…

"The finished bathroom matched the 3D design exactly. That alone put them ahead of the last contractor we used."

Carol F. Β· Sherman Oaks, CA

β˜…β˜…β˜…β˜…β˜…

"Fast, clean, and honest pricing from day one. No surprise charges after demo like our neighbor experienced."

Marcus L. Β· Long Beach, CA

β˜…β˜…β˜…β˜…β˜…

"We converted our tub to a walk-in shower and the whole bathroom feels twice as big now. Great tile work."

Priya K. Β· Torrance, CA

β˜…β˜…β˜…β˜…β˜†

"Our vanity installation was done in a single day with zero mess left behind. Very professional crew."

James O. Β· Burbank, CA

β˜…β˜…β˜…β˜…β˜…

"They pulled every permit and dealt with the city inspector so we never had to worry about compliance."

Angela R. Β· Culver City, CA

β˜…β˜…β˜…β˜…β˜…

"Walk-in tub installation for my mother went smoothly and the safety features give us real peace of mind."

Ben H. Β· Glendale, CA

Recent Work

Bathroom Remodeling Projects Across Los Angeles County

Recent bathroom projects across Los Angeles County.

Primary bathroom with freestanding tub, glass shower and dark wood double vanity

Pasadena, CA

Full Master Bath Remodel

Walk-in glass shower with dark tile, built-in bench and recessed niche

Silver Lake, CA

Custom Walk-In Shower

Freestanding white bathtub against wood-look tiled wall beside a window

Sherman Oaks, CA

Freestanding Tub Install

Blue and light wood double-sink vanity with two mirrors beside a window

Long Beach, CA

Double Vanity Upgrade

Process

What Happens, Step by Step

StageWhat happens
1. Site visitWe look at the room, the plumbing, and the ventilation, measure everything, and ask how you use the space.
2. Scope and selectionsThe layout, the work, and your fixtures and finishes are written down and approved before ordering.
3. DemolitionThe area is protected, old finishes come out, and the walls and floor are checked.
4. Rough work and sealingPlumbing, wiring, and framing are completed, and wet areas get their waterproofing.
5. Finishes and final reviewTile, fixtures, glass, and lighting go in, and we review every detail with you.

Before You Start

What Shapes a Culver City Remodel

City paperwork comes first; the rest is the room.

  1. 1

    Separate applications by trade

    Culver City requires a separate application for each structure and each record type, such as Building, Mechanical, Electrical, and Plumbing. A missing record means part of the work is not covered.

    We list every trade in the scope and open a matching record for each.

  2. 2

    HOA paperwork for condos

    The City's submittal list includes an HOA letter stating approval is not required, or a statement that the HOA has been notified. Condo and townhome owners need this document in the package.

    We ask about your association at the first visit so that document is ready.

  3. 3

    Alternating Friday closures

    Culver City Hall is closed on alternating Fridays. In-person payments or questions can slip a week if the visit lands on a closed Friday.

    We plan any counter visit for a day City Hall is open.

  4. 4

    A fan that actually clears the air

    Moisture that stays in a bathroom after a shower leads to peeling paint and mildew over time. An undersized fan, or one that vents into the attic, does not solve the problem.

    We size the fan to the room and duct it outside as part of the remodel.

FAQs

Culver City Bathroom Remodeling FAQs

Most full remodels in Culver City cost about $21,100-$56,250. Smaller refreshes can come in at $15,350-$28,600, same-layout remodels at $29,550-$56,750, and larger projects with layout changes at $46,350-$82,350.

The City requires a separate application for each record type, such as Building, Electrical, and Plumbing. We file each one so all of the work is covered.

The City's submittal list includes either an HOA letter saying approval is not required or a statement that the HOA has been notified of the work.

We stop and show you what we found, explain the options, and agree on any change in writing before continuing.

Not the whole time. We agree on access, working hours, and where materials are stored before the project starts.

It depends on the wall length, door swing, and where the plumbing sits. We measure first and show you the options, from compact 24-inch units to 72-inch double vanities.

A project manager measures the room, checks the plumbing and wiring, and talks through your goals. You then receive a written scope and price.

Start Today

Let's Plan Your Culver City Bathroom

Call or send the form. We'll measure, write the scope, and open the right records in the portal.

  • βœ“ Free in-home consultation & estimate
  • βœ“ Bonded & insured Los Angeles contractor
  • βœ“ Permits handled from start to finish

Request Your Culver City Estimate

Tell us about your bathroom. A local project manager will call within one business day.

πŸ“ž Call Now for a Free Estimate